Shanghai Samsung LCD Repair Center: 
 URL: 
 Wang Pu Address: 
 Tel: Mobile: 
 Maintenance Address: North Building, 861 Tian Yao Qiao Road, Building 2, Room 1504 

 Bus routes: 111, Road Terminal, tunnel 2-wire, 92B, 92 Road, 15 Road, 56 Road, 89 Road 236 Road, 326 Road, 770 Road, 864 Road, 932 Road, 957 Road, six-lane bridge; to the Shanghai Stadium Station opposite 

 Shanghai Stadium Station Subway Line 3, opposite to 

 One line fourth line of Shanghai Stadium Station and transfer to Shanghai Stadium Station exit 3; 

 Accepted Display Fault type: 
 SAMSUNG power is not power, 
 SAMSUNG power off 
 SAMSUNG secretly screen black screen split screen 
 SAMSUNG SAMSUNG LCD color cast flickering flashes, lack of color 
 SAMSUNG fuzzy fonts 
 SAMSUNG SAMSUNG a raster screen jitter 
 SAMSUNG can not adjust brightness 
 SAMSUNG contrast can not be adjusted, 
 SAMSUNG Huaping black and white pieces black screen splash screen 
 Lack of red / lack of green / blue short burn-in power protection matte black non-power burn Insurance 
 Samsung LCD 510/710 series disease resolved 

 Failure is as common problem is: do not take VGA signal display "No Signal", connected to the VGA signal is prompt " 
 The best model of non-recommended mode: 1024 × 768 60Hz "," best mode of non-recommended mode: 1280X1024 60Hz ", 
 Not receive the signal displays a black screen so no signal received signals, Samsung 510N, 510V, 710N, 710T, 710V, and other models prone to boot 
 After a period of time or the boot prompt "choose the best resolution 。。。。。" words, and then display the image without the usual black screen image. 
 According to the analysis of this series of models for the design defects caused the signal when the user hot line, the replacement of the resolution, the replacement card, driver error was 
 Card drivers and other operations will result in the failure time. The current repair method for replacement of common MCU, but according to our repair times 
 Experience, for MCU only when troubleshooting, the user will still appear after a period of similar failures. Repair of these models best 
 Way is to directly replace the driver board, you can use our original alternative new board has failed to completely repair the purpose of display to the original display or can be better!